Senin, March 13, 2013
PPPoE setup for Mac OS X 10.5
This tutorial will guide you through how to setup of a PPPoE (bridged) connection on Mac OS X 10.5. See Setting up a PPPoE connection for help with other operating systems.
Start by going to "System Preferences" by either selecting it from gears icon in the top menu bar or open it from the Dock.
Click the "Network" icon to continue.
This
will give you an idea of what's going on with the various network
configurations on your Mac. You will automatically be directed to the
highest priority connection which by default is "Built-in Ethernet".
This is okay as this is where we need to be.
| Click image for full version (669 by 538 pixels) |
Click on the "Configure" menu to reveal the options for Built-in Ethernet connections.
| Click image for full version (669 by 537 pixels) |
From here choose the "Create PPPoE Service" option. You will be prompted to name the connection.
| Click image for full version (669 by 538 pixels) |
Once you name the connection you will be presented with the setup screen for the PPPoE connection.\
Enter
your iiNet username and password. By ticking "Show PPPoE status in menu
bar" a small object will appear in your top menubar. This will allow
you to control the connection from your desktop.
| Click image for full version (669 by 538 pixels) |
Click "Apply Now". When you click on "Connect", your computer will attempt to connect using PPPoE.
Notice
the new icon in the top right of your screen? This new icon will allow
you to activate this PPPoE connection. Once connected to the Internet,
you can also use the same icon to disconnect.
PPPoE setup for Mac OS X 10.3 and 10.4
This tutorial will guide you through how to setup of a PPPoE (bridged) connection on Mac OS X 10.3 or 10.4. See Setting up a PPPoE connection for help with other operating systems.
To
set your Mac to connect via PPPoE, go to "System Preferences" by either
selecting it from Apple icon in the top menu bar or from the Dock.
Click the "Network" icon to continue.
Select "Built-in Ethernet" from the dropdown labelled "Show".
Select the tab labelled "PPPoE" and ensure you have completed the following:
- Tick the box labelled "Connect using PPPoE"
- Enter your iiNet username and password.
- Tick "Show PPPoE status in menu bar"; a small icon will appear in your top menu bar
Click "Apply Now".
The
icon highlighted below should now be visible in the top right of your
screen. This will allow you to activate the connection.
Once connected to the Internet, you can also use the same icon to disconnect.
Tidak ada komentar:
Posting Komentar